Description :
Hydraulic Universal
Testing Machine with underneath type oil cylinder and four columns
structure is mainly used to do tension, compression, bending, shearing test for
metal materials, non-metal material. It is applied for fields of metallurgy,
construction, light industry, aviation, aerospace, materials, universities,
scientific research units, etc.
This universal test
machine uses the motor to drive screw to move fixtures. Fix sample between
upper and lower fixture and pull sample by the upper fixture upward with
specified speed. The load cell connecting with upper fixture will sense the
force and then convert it into voltage sign to the display screen. Force value
will be displayed automatically on the screen.
Applications:
- Deformation under defined load: Test deformation under defined load of tested sample
- Load under defined deformation: Test load under defined deformation of tested sample
- Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.
- This Hydraulic Universal Testing Machine can do different test as per customer requirement such as peel test, tear test, compression test, bend test with different clamps.
Design Standard :
- Tensile Test : ASTM D882 ASTM D 638 / ISO 527-1/2
- Bend Test ISO-178 / ASTM D 790
- Tear Test : ASTM D 624
- Peel Test : ASTM D 3330
- Compression Test : ASTM D 659
Specification:
|
Item
|
Description
|
|
Max. load
|
300KN
|
|
Load range
|
6KN-300KN
|
|
Load accuracy
|
±1%
|
|
Elongation
resolution
|
0.01mm
|
|
Piston stroke
|
250mm
|
|
Max. piston stroke
speed
|
50mm/min
|
|
Elongation accuracy
|
±1%
|
|
Max. Tensile space
|
300mm(excluding
piston stroke)
|
|
Max. Compression
space
|
250mm(excluding
piston stroke)
|
|
Display mode
|
PC
|
|
Clamping mode
|
Hydraulic
|
|
Operation mode
|
Manual
|
|
Flat sample
thickness
|
0-15 mm
|
|
Clamping width
|
70mm
|
|
Round sample
diameter
|
Φ10-φ32 mm
|
|
Compression plate
size
|
170*170mm
|
|
Load frame
dimensions
|
900*750*2200mm
|
|
Oil source
dimensions
|
1200 x 550 x 1100mm
|
|
(universal testing machine)Related
Products:
|
|
|
HD-609/604
|
2000 kg (20KN)Max. Force / for Tape, rubber,
plastic, textile, waterproof material, wire and cable, net rope, wire, metal
rod, fiber, metal chain, metal plate and other materials
|
|
HD-611
|
10T (100KN) Max. Force / for waterproof
material, wire and cable, net rope, wire, metal rod, fiber, metal chain,
metal plate and other materials
|
|
HD-615
|
5000 kg (50KN) Max. Force / for textile,
waterproof material, wire and cable, net rope, wire, metal rod, fiber, metal
chain, metal plate and other materials
|
|
HD-B616
|
20KN-1000KN (Hydraulic) load range / for waterproof
material, wire and cable, net rope, wire, metal rod, fiber, metal chain,
metal plate and other materials
|
